B&W TS10049B Tow & Stow 3-Ball Mount 7" Drop/Rise, 10K lbs, 2" inch Hitch

Features:

Stowable design lets you store ball and mounting platform underneath your vehicle

Remove pins holding ball mount platform in place on shank

Adjustable height lets you tow trailers of different heights with the same vehicle

3 Different-size hitch balls let you tow trailers with different coupler sizes

Dual-process chrome plating on balls provides excellent rust resistance

Black powder coated shank is corrosion resistant

Stainless steel pins create sturdy, rust-resistant connections

Durable steel construction with high yield tubing offers superior strength

Hitch pin and clip or hitch lock sold separately

Made in the USA

Specs:

Application: 2" x 2" trailer hitch receivers

Gross towing weight:

 1-7/8" ball: 3,500 lbs

 2" ball: 7,500 lbs

 2-5/16" ball: 10,000 lbs

Distance from center of hitch pin hole to center of hitch ball:

 9"

 10"

Maximum drop: 7"

Maximum rise: 7"

Incremental height adjustment: 1"

Minimum clearance: 11" 

Limited lifetime warranty

The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.

To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.

Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.

When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.

Built-In Anti-Theft System

The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.

A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.

When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.